Home >Модуль>SPI/SOC/UART>SI44**
Ebyte Дешевые в продаже приемопередатчики Беспроводные и радиочастотные модули с большой дальностью передачи

[Вес изделия]:5.4±0.1g

[IC]:SI4463

[Частота]:855~925MHz

[Сила]:30dBm

[Расстояние]:5.6km

[Размер]:38.5*24mm

[Введение]:E30-900M30S — это аппаратный модуль (SPI), основанный на RF-чипе SI4463, импортированном из Silicon Labs. Это полудуплексный SMD-приемопередатчик с возможностью прозрачной передачи. С рабочим диапазоном частот 855–925 МГц и мощностью передачи 1 Вт он подходит для различных сред.

1
Pin No. Item Direction Description
1 GND -    Ground wire, connected to the power reference ground
2 GND -    Ground wire, connected to the power reference ground
3 GND -    Ground wire, connected to the power reference ground
4 GND -    Ground wire, connected to the power reference ground
5 GND -    Ground wire, connected to the power reference ground
6 IO_2 Output    Configurable universal GPIO port (see SI4463manual for details)
7 IO_3 Output    Configurable universal GPIO port (see SI4463manual for details)
8 IO_0 Output    Configurable universal GPIO port (see SI4463manual for details)
9 VCC -    Power supply, 3.3~5.5V, 5V is recommended (It is also recommended to add external ceramic filter capacitor)
10 VCC -    Power supply, 3.3~5.5V, 5V is recommended (It is also recommended to add external ceramic filter capacitor)
11 GND -    Ground wire, connected to the power reference ground
12 GND -    Ground wire, connected to the power reference ground
13 IO1 Output    Configurable universal GPIO port (see SI4463manual for details)
14 IRQ Output    SPI interrupt request
15 SDN -    Shutdown Input Pin. It is low level when working(See SI4463 manual for more details)
16 MISO Output    SPI master output slave input
17 MOSI Input    SPI master input slave output
18 SCK Input    Serial Clock Input
19 NSEL Input    SPI Chip select for starting SPI communication
20 GND -    Ground wire, connected to the power reference ground
21 ANT Input/Output    Antena
22 GND -    Ground wire, connected to the power reference ground